Ultrasonic Thickness Gauge DH-TDS110

436Portable ultrasonic thickness meter for most dense materials to 300mm
 TDS110 Ultrasonic Thickness Gauge

            The TDS-110 is a universal meter for measuring thickness of dense solids. Whilst it is offered in the context of being used to measure pipe wall thickness for calibrating transit time flow meters, it is useful for any production or maintenance measurements. Calibration is determined by entering the velocity of sound in the measured material - then the meter will read wall thickness. Zero, calibration and two point calibrations are possible
  • Measuring range : 0.75mm to 300.0mm
  • Sound velocity : 1000-9999m/sec
  • Resolution : 0.01mm to 99.99mm then 0.1mm above that
  • Accuracy : 0.5% +0.02mm - depending on material and conditions
  • 5MHz probe : Lower limit for steel pipe dia 20mm x 3mm (included with TDS110)
  • 10MHz probe : Lower limit for steel pipe dia 15mm x 2mm (optional accessory)
 
Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 
Get More InformationGet Quote

Parts Listing

DH-TDS110Hand held ultrasonic thickness meter to 99.99mm - loggingIn Stock

Document Listing

FAQDH-TDS100 FAQ
Data sheetDH-TDS110 Thickness Gauge
Instruction ManualThickness gauge